
erased, just like a tape recorder. While RECORD mode is active, the light
above the RECORD key goes on.
It is also possible to "punch in" into record mode while playing. To do
this:
1. The top line of the PLAY/RECORD screen must display the
words "Play/Record (Record ready)". This means that the
sequence is ready to record. If the words "(Record ready)" do
not appear in the title, simply press and release the RECORD or
OVERDUB keys once while stopped.
2. While the sequence is playing, simultaneously press the
RECORD and PLAY keys. Record mode is now active,
indicated by the light above the RECORD key.
To "punch out" of RECORD mode, simply press the RECORD key
once, and the light above the RECORD key will turn off.
Note: If RECORD mode is entered while the sequence is set to loop to bar
1(or a portion of the sequence is looped with the EDIT LOOP function),
RECORD mode automatically switches to OVERDUB mode at the
moment the sequence reaches the end and starts to loop. This prevents
accidently erasing any data which was recorded on the previous pass
through the loop. If, however, RECORD mode is entered while the
sequence is set to loop to a bar higher than bar 1, RECORD mode will
automatically be turned off at the moment the sequence reaches the end
and starts to loop.
NOTE: If an empty sequence is selected (the sequence name says "unused"),
and either RECORD or OVERDUB is pressed, the sequence will instantly
be created using the settings in the CREATE SEQUENCE screen. This
function is normally accessed by pressing the EDIT key and selecting 2.
• The "«" key: This key causes the current position within the sequence to
rewind to the beginning of the nearest earlier bar.
• The "»" key: This key causes the current position within the sequence
to fast forward to the beginning of the nearest higher numbered bar.
• The "<" key This key normally causes the current position within the
sequence to rewind to the previous 1/16 note. However, the amount of
movement is set by the NOTE VALUE field in the TIMING CORRECT
screen, which is usually set to "1/16 NOTE". To change the amount of
movement, simply change the setting in this data field.
46
Содержание MPC 60
