Akai MPC 60 Скачать руководство пользователя страница 23

Страница: 23 / 228

Section 2: The Basics

2.7 The DYNAMIC DRUM PADS

The 16 drum pads are dynamic- the harder you strike them, the louder

the drum will sound.

2.7.1 The FULL LEVEL and 16 LEVELS keys

• The FULL LEVEL key: The FULL LEVEL key defeats the variable

dynamics of the drum pads, causing all drums to play at full dynamic level,

regardless of how hard or soft the pad is struck. However, this has no effect

on drums which are playing back from sequences. Press FULL LEVEL

once to turn this mode ON (the light will go on); press it again to turn it

OFF.

• The 16 LEVELS key:

This key has 2 functions, but only one may be in use at a time:

1. It may be used to play a single drum at 16 fixed dynamic levels,

using the 16 pads.

2. It may be used play a single drum at 16 fixed tunings, using

the 16 pads.

To select which of these 2 functions is currently in use, press the

SOUNDS key, then select option 8, "Mixer/hihat/other", and the

following screen will appear:

Now, move the cursor to the lowest field on the screen entitled

FUNCTION OF

"16

LEVELS". This is a "choice" type field and has 2

options:

1. "16

VOLUMES": If this option is selected, the

LEVELS key

will cause a single sound to play from all

pads, but at

fixed

dynamic levels with the softest level on the lower leftmost pad

and the loudest level on the upper rightmost pad.

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 23 / 228

Результаты поиска

Содержание MPC 60

Отзывы: