manualshive.com logo in svg

Akai MPC 60, Руководство оператора, Страница: 85 / 228

Поделиться
Скачать
Akai MPC 60 Скачать руководство пользователя страница 85

 

 

 

Section 4:Editing sequences

 

85

 

 
 

 

4.2 The ERASE key 

 

There are two main areas of the erase function: 

 

• Erasing notes while in overdub mode ("Live erase" mode) 
• Erasing specific events while stopped 

 

Each is described in detail in the following sections. 

 
 
 

4.2.1 Erasing notes while overdubbing ("Live erase" mode) 

 

One of the ways to erase notes is called "live erase" mode. If the 
ERASE key is pressed and held during OVERDUB mode, the top 
line of the main screen changes for as long as ERASE is held: 

If, during this time, you press a drum pad (if the active track is a "drums" 
track) or hold a key on the midi keyboard (if the active track is a 
"non-drums" track), any occurrences of that drum or key on the selected 
track while both (the ERASE key and the appropriate pad or key) are 
held down will be erased. 

4.2.2 The ERASE screen 

 

If the ERASE key is pressed while the MPC60 is not playing, one of the 
following two screens will appear: 

Содержание MPC 60





































































































































































































































Отзывы:

Нет отзывов