Akai MPC 60 Скачать руководство пользователя страница 44

Страница: 44 / 228

form. This method has the advantage of being able to change the

assignments of keyboard note numbers to drums at any time without

affecting the sequence data. (These two assignment functions are

accessed by pressing the MIDI key and selecting option 2.)

THE ONLY FACTOR WHICH DETERMINES WHETHER A TRACK

IS A "DRUMS" OR "NON-DRUMS" TRACK, AND THEREFORE

WHETHER OR NOT THESE CONVERSIONS ARE DONE IS THE

TRACK'S OUTPUT MIDI CHANNEL ASSIGNMENT - IF IT IS

ASSIGNED TO THE SAME CHANNEL AS THE INTERNAL DRUMS

(NORMALLY 16), IT IS A "DRUMS" TRACK; IF IT IS NOT

ASSIGNED TO THE SAME CHANNEL AS THE INTERNAL DRUMS,

IT IS A "NON-DRUMS" TRACK.

Because the aforementioned note number conversions are only

performed on "drums" tracks, it is important that you DO NOT do the

following:

• DO NOT record a drums track , then change its midi channel

assignment to a channel other than 16. Otherwise, when the

sequence is played, midi note numbers 0 - 31 will play instead of

the correctly assigned note numbers.

• DO NOT record a non-drums track, then change its midi channel

assignment to "16". Otherwise, when the sequence is played,

keyboard note numbers below 32 will be translated to the assigned

drum note numbers, and notes above 31 will not play at all.

There are some functions in the MPC60 which treat a "drums" track

differently than a "non-drums" track. For example, the screen which is

displayed when the ERASE key is pressed is different for "drums" and

"non-drums" tracks. Other examples are the STEP EDIT screen and the

TRANSPOSE function.

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 44 / 228

Результаты поиска

Содержание MPC 60

Отзывы: