Akai MPC 60 Скачать руководство пользователя страница 133

Страница: 133 / 228

Section 6: Sampling and editing sounds

133

6.3 Editing an existing sound

This function is used to edit a drum sound in your MPC60. The

available features are:

• Edit the sound name.

• Change the start or end address.

• Adjust the attack time or fadeout time.

• Adjust velocity control of start address, attack time, or volume.

• Cause a drum to automatically play when another is played, or to select

between playing 2 sounds depending on the note velocity.

• Set the initial volume and tuning.

• Delete unused start and end portions of the sound.

• Reverse the sound.

• Delete the entire sound from memory. To edit an existing drum sound,

press the SOUNDS key, then type 2 to select the EDIT A SOUND option,

and the following screen will be displayed:

This is the first of two screens which together present for editing all

parameters associated with each of the resident drum sounds. The fields

and soft keys are:

• The DRUM field:

This field is used to select the drum (drum pad) which contains the sound

to be edited. All other fields display the data for this drum.

• The NAME field:

This is the 16 character name of the sound currently residing in the

displayed drum. This may be changed in the same way as sequence names

are changed.

• The DOUBLE PLAY section:

This feature allows you to assign one drum to automatically play a second

drum whenever the first one plays. Also, they allow a "velocity switch"

feature - depending on the note velocity, one of two different sounds may

play. Each of the three fields is described below:

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 133 / 228

Результаты поиска

Содержание MPC 60

Отзывы: