Akai MPC 60 Скачать руководство пользователя страница 214

Страница: 214 / 228

214

10.1 Features

Here is a list of some of the advanced features of the MPC60:

General:

• Small, portable design - fits easily under your arm.

• Large 320 character LCD display (8 lines by 40 characters) with

graphics.

• Built-in 3 1/2" disk drive stores both sequence and sound data.

• Fast, easy to understand operation provided by large screen and logical,

intuitive design.

• Interactive "Help" function, providing a full paragraph of

explanation for each data field of every function screen.

• 4 "soft keys" provide one button execution of many functions

without additional dedicated buttons.

• The contents of all data fields and other minor settings are retained

while the power is turned off, so there is no need to reset commonly

used parameters each time the power is turned on.

• Large memory capacity: 512K bytes sequence RAM, 768K bytes sampling

RAM (expandable to 1.5 megabytes sampling RAM), 256K bytes program

ROM.

• Very fast internal 10 MHz 80186 16 bit microprocessor.

Sequences section:

• Both linear and pattern style (song mode) recording are

supported.

• Both "drum machine" style features and sequences-oriented features

are integrated into one universal, easy to use operating system.

• 60,000 note sequences capacity

• 99 sequences may be held in memory at once. Each sequence contains

99 individual tracks, each of which may be output to any one or two midi

channels.

• The "2nd Sequence" feature allows two sequences to play

simultaneously. For example, you play a short, looped drum sequence

while simultaneously recording your long multi-track keyboard sequence.

• 4 independent midi output ports permit 64 output midi channels.

• 7 sync modes, including SMPTE, Midi Time Code, midi clock, midi song

pointer, FSK, pulse wave, and sync to 1/4 note metronome clicks.

• SMPTE chase operates without any delays.

• 2 record modes: "Record" (erasing while recording) and "Overdub" (add

notes to existing track) may be switched between at any time.

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 214 / 228

Результаты поиска

Содержание MPC 60

Отзывы: