Akai MPC 60 Скачать руководство пользователя страница 88

Страница: 88 / 228

4.3 The EDIT key

The EDIT key encompasses the following functions related to

editing of the active sequence:

• Viewing all time signature changes

• Creating a new sequence

• Inserting blank bars into a sequence

• Deleting specified bars from a sequence

• Copying a section and inserting it elsewhere within the same or another

sequence

• Copying a single track to another area or merging it with other data

• Copying an entire sequence to another sequence

• Converting a song to one long sequence

• Lengthening or shortening a bar by changing the time signature

• Changing the velocity or duration values of a group of notes after

recording

When the EDIT key is pressed, the following screen is displayed:

Pressing a single number key will cause the screen for the selected function

to be displayed.

4.3.1 Viewing time signature changes

This function displays the time signature and number of bars in the active

sequence, and any time signature changes, but does not allow any changes to

be made. To use this function, select option 1 from the EDIT screen and the

following screen will be displayed:

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 88 / 228

Результаты поиска

Содержание MPC 60

Отзывы: