Akai MPC 60 Скачать руководство пользователя страница 89

Страница: 89 / 228

Section 4:Editing sequences

This screen displays all time signature changes within the active sequence,

and the number of bars for each change. If no time signature changes exist,

the existing single time signature and the total number of bars in the

sequence will be displayed. Space is given for 10 time signature changes with

2 changes per line. If more exist, the <Next Page> soft key is used to view

further pages of changes, and the <Previous Page> soft key is used to

re-display earlier pages.

4.3.2 Creating a new sequence

This function is used to create an entirely new sequence format for

the active sequence. However, this erases the entire contents of the

active sequence! To use this function, press option 2 from the EDIT

screen and the following screen will be displayed:

The following is a description of the on-screen fields:

• The TIME SIG field (time signature):

This is the time signature of the bars which will be created. This is actually

two fields- one for each part of the time signature.

• The NUMBER OF BARS field:

This is the number of bars which will be created.

• The LOOP field:

This field is a choice field with 2 options: OFF and TO BAR, 1. If set to

OFF, the newly created sequence will automatically stop when it plays to

the end (or if in RECORD mode, it will continue to add bars

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 89 / 228

Результаты поиска

Содержание MPC 60

Отзывы: