Akai MPC 60 Скачать руководство пользователя страница 171

Страница: 171 / 228

Section 7: Saving to l loading from Disk

171

7.9 Copying an entire disk

This feature permits an entire MPC60 disk to be copied. This provides an

easy way to backup your data disks. To copy a disk, have both your

original disk and a blank formatted disk available and select option 8 from

the disk menu. The following screen will appear:

The disk copy function requires the use of the sequence memory and

therefore will erase all existing sequences before making the copy. Press

<Yes, proceed> to proceed with the copy and the following screen will

appear:

When you see this screen, insert the original disk in the disk drive and press

<Proceed>. The bottom line will then display the message "Copying source

disk. Please wait...". When it has copied as much as it can fit in memory, it

says:

Now, remove the original disk and insert the blank formatted disk, then

press <Proceed>. The bottom line will change to "Writing to destination

disk. Please wait...". If all the disk data has not been copied, the cycle of

inserting the source, then the destination disks will be repeated until all data

is copied. When finished, the DISK menu will be re-displayed.

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 171 / 228

Результаты поиска

Содержание MPC 60

Отзывы: