Akai MPC 60 Скачать руководство пользователя страница 105

Страница: 105 / 228

Section 4:Editing sequences

105

locations, and you are currently viewing notes falling on nonshifted

locations.

Here's more details about STEP EDIT:

The step edit screen may display up to five events, one on each line, which

exist at the current sequence position, or "step". The format of the event

line is different for each type of event, but the first two fields of each event

type are the same:

At the left edge of the screen is the event number within the current step.

There can be many events at this step, and this field indicates the number of

the event within the step. For example, if a three note chord existed at this

step, this field would show the number of each note within the chord. To

the right of the event number is an untitled choice field, containing the type

of event displayed. Examples of midi events are: notes, pitch bend, program

change, etc. The other fields to the right are unique for each type of event.

The available types of events and their associated data fields are:

>O1-NOte> C#3

Ve1:083/064

Dur:0142

This is a NOTE event. The fields are:

1. PITCH (untitled): This choice field has no title, but

contains the pitch of the note, showing the note name

(C through B; sharps are indicated by a "#"), followed

by the octave (-2 through 8). The range is from C-2 to

G8.

2. VEL (velocity): This is actually two fields: the initial

velocity and the release velocity. The range for

both is from 0 to 127.

3. DUR (duration): This field shows the duration from

the "note on" to the "note off", measured in clocks

(1/384 notes). The range is 1 - 9999.

>O1-Note> TOMl Ve1:064 Tun:

0 Dur:

This is a DRUM NOTE event. The fields are:

1. DRUM NAME (untitled): This choice field indicates

which of the 32 internal drum names this event

applies to.

2. VEL (velocity): This is the velocity of the drum

note.

3. TUN (tuning): This field sets the tuning for the

displayed note only, and is added to the tuning

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 105 / 228

Результаты поиска

Содержание MPC 60

Отзывы: