Akai MPC 60 Скачать руководство пользователя страница 79

Страница: 79 / 228

Section 3: Recording sequences

2. Go to the SYNC screen and set the MPC60 to sync to "MIDI CLOCK

W/SONG POSITION POINTER". Also, set the MIDI field to "1" (if the

external sequences was connected to midi input 1).

3. Press the OTHER key, then select SOFT KEY 2, <Record 16 chs>,

which causes the following screen to be displayed:

This screen allows you to select the sequence to be recorded into, and the

time signature of the new sequence which will be created. As the screen

states, pressing <Proceed> will completely erase the contents of the selected

sequence.

4. Enter the desired data into these fields and when finished, press the

<Proceed> soft key. The following screen will appear:

This is the screen from which the actual recording will take place. You have

now created a new sequence containing one bar of the time signature you

entered in the previous screen.

The first 16 tracks have been assigned to midi channels 1 through 16 as

described above. Assuming channel 16 is the assigned "drums" channel,

track 16 is therefore assigned as the only "drums" track. Because of this, you

should transfer any drum data on channel 16 and check to see that the

note-to-drum assignments of the external sequence match the assignments

in the MPC60. These can be changed by pressing the MIDI key and

selecting option 2.

The tempo value is taken from the current master tempo if MASTER tempo

mode is active, or from the tempo setting in the CREATE SEQUENCE

screen if SEQUENCE tempo mode is currently active. This tempo setting

may be changed.

The LOOP field is forced to "OFF" and cannot be changed while in this

screen. This is necessary because loop recording is not permitted during 16

channel record mode. As is normal when

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 79 / 228

Результаты поиска

Содержание MPC 60

Отзывы: