Akai MPC 60 Скачать руководство пользователя страница 91

Страница: 91 / 228

Section 4:Editing sequences

The on-screen fields are:

• The NUMBER OF BARS field:

This is the number of blank bars to be inserted.

• The TIME SIGN field (time signature):

This is the time signature of the bars to be inserted. This is actually two

fields- one for each part of the time signature. The range of the first part is

from 1 to 31; the second part is a "choice" field with 4 selections: 4, 8, 16,

and 32.

• The INSERT BEFORE BAR field:

This field specifies the bar number which the new bars will be inserted

before. To insert bars after the end of the sequence, enter here the number

of the bar which is one higher than the last bar of the sequence.

• SOFT KEY 1- <Execute>:

Pressing this soft key performs the insertion according to the above

displayed parameters.

NOTE: If the sequence is set to loop to an earlier bar (in the time

signature / ending status screen) and the new bars are inserted before

the loop bar, causing the sequence to now loop to a different place, the

bar number specified in the LOOP field will automatically be adjusted to

compensate for the insertion.

4.3.4 Deleting bars from within a sequence

This function allows you to delete a specified number of bars from the

active sequence. To use this function, press option 4 from the EDIT

screen and the following screen will be displayed:

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 91 / 228

Результаты поиска

Содержание MPC 60

Отзывы: