Akai MPC 60 Скачать руководство пользователя страница 165

Страница: 165 / 228

Section 7: Saving to l loading from Disk

165

7.7 Loading, erasing or renaming files

This function is used to either load, erase or rename any files on the

currently inserted disk. In the case of a load, depending on the file

extension, subsequent screens will guide you to load the file into the proper

place.

From the disk screen, type 6 to select LOAD/ERASE/RENAME and the

following screen will be displayed:

To select a file for either loading, erasing or renaming, use the DATA

CONTROL. For every click of the DATA CONTROL, a different file

from an alphabetical list of files on the disk will be displayed in the FILE

field, with its size (in bytes) displayed in the SIZE field. In the lower half of

the screen are two fields showing the available memory in both the

sequence memory and the sound memory. By comparing the file size to the

available memory, you will be able to see if there is enough space available

to load the selected file.

Loading files:

• If a SEQ file is selected and <Load it> is pressed, the following screen

will be displayed, asking you to select the sequence number to load the file

into:

Select the sequence number to load the file into, then press <Load file>.

The lowest numbered empty sequence is selected by default. After the file

is loaded, the previous screen is re-displayed.

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 165 / 228

Результаты поиска

Содержание MPC 60

Отзывы: