Akai MPC 60 Скачать руководство пользователя страница 149

Страница: 149 / 228

Section 6: Sampling and editing sounds

149

6.9 Mixer modes, What decay thresholds, muitipitch
mode

Option 8 from the SOUNDS screen, "Mixer/hihat/other", displays a

single screen which provides access to the following functions related to

drum sounds:

• Setting the stereo mixer mode (SEQUENCE or MASTER).

• Setting the echo mixer mode (SEQUENCE or MASTER).

• Using the stereo mixer as an automated mixer, remembering all changes

made while recording.

• Using the echo mixer as an automated mixer, remembering all changes

made while recording.

• Setting the point at which the hihat decay slider switches to each of the 3

hihat sounds.

• Setting the midi controller number for the hihat decay.

• Setting the 16 LEVELS key to provide either 16 volume levels or 16

tunings ("mufti-pitch" mode).

To view this screen, press the SOUNDS key, and type an 8 to select the

"Mixer/hihat /other" option, and the following screen will be displayed:

There are three sections to this screen:

The MIXER MODES section:

This section contains four fields:

• The STEREO MIX field:

The stereo mixer may be set in this field to one of two main modes:

1. SEQUENCE:

2. There is a set of stereo mix settings stored within each

sequence. If the stereo mix mode is set to SEQUENCE, these

internal settings are used. In this mode, all mixer settings and

changes are stored to disk with the sequence, and when a new

sequence number is selected, these settings are automatically

loaded into the SEQUENCE mix settings.

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 149 / 228

Результаты поиска

Содержание MPC 60

Отзывы: