Akai MPC 60 Скачать руководство пользователя страница 74

Страница: 74 / 228

3.15 The two Foot switch inputs

There are two foot switch inputs on the rear of the MPC60. Each of the two

foot switch inputs may be independently assigned to one of a number of

different purposes. To assign the foot switches, press the OTHER key, and

the following screen will appear:

The FOOT1 and FOOT2 fields are used to assign the functions of the two

foot switches. Each may be independently assigned to one of the following

functions:

• PLAY/STOP:

Press once for PLAY, again for STOP.

• PLAY-STRT / STP (Play start / stop):

Press once for PLAY START, again for STOP.

• ERASE:

Press to duplicate the function of pressing ERASE. This is very

useful for hands-free use of the real-time erase function.

*TIMING CORECT (Timing correct):

Press to duplicate the function of pressing TIMING

CORRECT. This is very useful for hands-free use of the

NOTE REPEAT function.

• "+":

Press to duplicate the function of turning the DATA

CONTROL to the right one step.

“-“:

Press to duplicate the function of turning the DATA

CONTROL to the left one step.

• RECORD IN/OUT:

Press once to duplicate the function of punching in to RECORD

mode while playing; press again to duplicate the

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 74 / 228

Результаты поиска

Содержание MPC 60

Отзывы: