Akai MPC 60 Скачать руководство пользователя страница 100

Страница: 100 / 228

100

This is a choice field with 2 options: VELOCITY and

DURATION. It is used to select which of these 2 parameters the

function will affect.

• The VALUE field:

This field works in conjunction with the ACTION field and sets the

number which will be used to change the velocities or durations.

• The ACTION field:

This is a choice field and has 4 options:

1. ADD "VALUE" TO EACH: This selection adds the

number in the VALUE field to each note in the range.

2. SUBTRACT "VALUE" FROM EACH: This selection

subtracts the number in the VALUE field from each

note in the range.

3. MULTIPLY EACH BY "VALUE" %: This selection

multiplies each note in the range by the number in the

VALUE field. A value of 100% = no change; values of

101 to 200% proportionally increase each note's

velocity; values of 0 to 99% proportionally decrease

each note's velocity value.

4. SET EACH TO "VALUE": This selection changes each

note in the range to the number in the VALUE field.

• SOFT KEY 1- <Execute>:

After you have entered the correct data in each of the above

fields, pressing this soft key performs the actual function.

Example: To reduce the velocity values of all notes in a track by

half, set the screen fields to the following values:

1. Set the TRACK field to the track you wish to

change;

2. Set the FROM field to the start of the sequence;

3. Set the TO field to the end of the sequence;

4. Set the CHANGE field to VELOCITY;

5. Set the VALUE field to 50;

6. Set the ACTION field to MULTIPLY EACH BY

`VALUE' %

7. Press <Execute>

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 100 / 228

Результаты поиска

Содержание MPC 60

Отзывы: