Akai MPC 60 Скачать руководство пользователя страница 54

Страница: 54 / 228

quickly play the correct note. You may now either "punchout" by

pressing RECORD again or continue recording from that point.

Don't worry- when the sequence loops back to bar 1, it will

automatically switch from RECORD to OVERDUB modes so

that those notes in the earlier part of the sequence won't be

erased.

Now, overdub the piano chords part on track 4:

1. Move the cursor to the TRAK field and type "4" (ENTER) to make

track 4 active.

2. Move the cursor to the upper CH field (5th line) and type "2" (ENTER),

then select "A" in the field immediately to the right, to select midi

channel 2A as the output channel for track 4.

3. If you play the midi keyboard now, the piano synthesizer should sound.

If not, check the midi connections, check the setting of the MIDI SOFT

THRU field, and re-check the previous three steps.

4. Enter OVERDUB mode by holding OVERDUB and pressing

PLAY START.

5. Record your piano chords part in time to the drums, percussion and

bass parts.

6. Press STOP.

Finally, overdub the piano melody part on track 5:

1. Move the cursor to the TRAK field and type "5" (ENTER) to make

track 5 active.

2. Move the cursor to the upper CH field (5th line) and type "2" (ENTER),

then select "A" in the field immediately to the right, to select midi

channel 2A as the output channel for track 5. Notice that both tracks 4

and 5 are playing into midi channel 2A, the piano synthesizer.

3. If you play the midi keyboard now, the piano synthesizer should sound.

If not, check the midi connections, check the setting of the MIDI SOFT

THRU field, and re-check the previous three steps.

4. Enter OVERDUB mode by holding OVERDUB and pressing

PLAY START.

5. Record your piano melody part in time to the drums, percussion, bass

and piano chord parts.

6. Press STOP.

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 54 / 228

Результаты поиска

Содержание MPC 60

Отзывы: