Akai MPC 60 Скачать руководство пользователя страница 10

Страница: 10 / 228

P.S. I'd like to know if you use the MPC60 on any famous records. If so, I'd

appreciate it if you would write a brief letter to your local distributor and

they'll tell me. Thanks.

1.1 Welcome!

Thank you for purchasing the Akai MPC60. The Akai engineering team, my

engineering team and myself have all worked very hard to bring to you a

product which we truly believe answers the needs of today's professional

musician. I am sure you will find that the combination of innovative

features, high sound quality, ease of use and attention to detail will be very

useful in the process of composition, recording and performing. It has been

said that technology has always had a profound influence on art. If this is

true, I invite you all to take this piece of technology and use it to change the

direction of music for tomorrow. Now, let's begin...

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 10 / 228

Результаты поиска

Содержание MPC 60

Отзывы: