Akai MPC 60 Скачать руководство пользователя страница 136

Страница: 136 / 228

136

As the screen warns, pressing <Execute> will permanently delete the

unused ends of the sound. To cancel the deletion, press <Cancel>.

NOTE: If a sound is currently loaded into more than one drum (for

example, a tom-tom is loaded into both TOM3 and TOM4 at two different

tunings) and you press the <Cutoff Ends> soft key, the truncation will not

occur. This is because the other drum which is also using this sound may

need the ends of the sound which you want to cut off. If this occurs and

you are still certain you want to cut off the ends, you must first delete the

sound from the other drums) which are using it.

• SOFT KEY 2- <Reverse>:

This function allows a sound to be reversed in memory, front to back.

Pressing this soft key causes the following screen to be displayed:

Pressing <Execute> will cause the sound to be reversed, front to back.

When complete, the previous screen is re-displayed. This is not an

irreversible operation- if you decide that you do not like the reversed

sound, you can re-reverse it back to the original sound.

NOTE: The reverse function does not change any of the other settings in

the EDIT A SOUND screen. For example, the contents of the START and

END fields are not exchanged after a <Reverse> operation.

NOTE 2: As the screen warns, a reverse operation will affect all drums

which are currently using this sound. This is because the actually sample

memory is being reversed. For example, if a single "tom tom" sound is

simultaneously loaded into TOM1, TOM2, TOMS, and TOM4 (at different

tunings) and you reverse the sound in the drum TOM1, then the reversed

sound will play in all four

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 136 / 228

Результаты поиска

Содержание MPC 60

Отзывы: