Akai MPC 60 Скачать руководство пользователя страница 164

Страница: 164 / 228

164

To save a parameter file:

1. Assign the 16 character name for the parameter file to be saved. To

name the file, use the same method as used to name sequences:

A) Rotate the DATA CONTROL one step in either direction to

change the alphabetic keys to their letter functions.

B) Type in the new name, followed by ENTER.

There are two on-screen fields to determine whether there is enough space

on disk to save the file: SIZE and DISK SPACE AVAILABLE. SIZE

displays the size (in bytes) of the file; DISK SPACE AVAILABLE displays

the available space (in bytes) on the disk currently inserted in the disk drive.

The parameter file should be smaller than the disk space available for the file

to fit on the disk.

2. Press SOFT KEY 1, <Save it to disk>, to save the sequence file to disk.

The file extension of parameter files is "PAR". After the file is saved, the

"Save Parameters" screen remains so that you can save another parameter

file if desired.

NOTE: If you attempt to save a file to a disk which already contains a file of

the same name, the lowest 2 lines of the screen will change to the following:

If you press SOFT KEY 1, <Yes>, the existing disk file will be

overwritten by the file you are saving. If you press SOFT KEY 2,

<No>, the save operation is cancelled and the previous screen is

redisplayed.

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 164 / 228

Результаты поиска

Содержание MPC 60

Отзывы: