Akai MPC 60 Скачать руководство пользователя страница 158

Страница: 158 / 228

7.4 Saving a drum sound

This function saves a single drum sound to a disk file, called a "sound"

file (the 3 letter file extension is "SND"). From the disk menu screen,

type 3 to select SAVE A SOUND and the following screen will appear:

To save a drum sound:

1. Select the sound to be saved using the DRUM field. As you change the

drum, the NAME field will change to reflect the sound contained in the

selected drum. The disk file name will be created from the sound name.

There are two on-screen fields to determine whether there is enough space

on disk to save the file: SIZE and DISK SPACE AVAILABLE. SIZE

displays the size (in bytes) of the selected sound; DISK SPACE

AVAILABLE displays the available space (in bytes) on the disk currently

inserted in the disk drive. The sound size should be smaller than the disk

space available for the file to fit on the disk.

2. Press SOFT KEY 1, <Save it to disk>, to save the sound file to disk.

The file extension of sound files is "SND". After the file is saved, the

"Save a Sound" screen remains so that you can save another sound.

NOTE: If you attempt to save a file to a disk which already contains a file of

the same name, the lowest 2 lines of the screen will change to the following:

If you press SOFT KEY 1, <Yes>, the existing disk file will be

overwritten by the file you are saving. If you press SOFT KEY 2,

<No>, the save operation is cancelled and the previous screen is

redisplayed.

158

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 158 / 228

Результаты поиска

Содержание MPC 60

Отзывы: