Akai MPC 60 Скачать руководство пользователя страница 112

Страница: 112 / 228

4.6 The TRANSPOSE key

This function allows you to transpose a track up or down by a specified

amount in real time. This function is only a temporary change - the

sequence data is not altered, unless SOFT KEY1, <Transpose Permanent,

is pressed. Also, the MPC60 knows not to transpose "drums" tracks- only

"non-drums" tracks can be transposed.

The following is a description of each of the screen fields and soft keys:

• The TRACK(0=All) field:

The field specifies the track which will be transposed. Enter a "0" here if

you want all tracks to be transposed simultaneously.

• The AMOUNT field:

This field sets the amount and direction of transposition. For example, to

transpose up a fifth, enter a 7. To transpose down a fourth, turn the DATA

CONTROL to the left until "-5" appears. However, a much faster way to

set this field is to simply press a key on the midi keyboard-- the amount will

be automatically set by the location of the key in relation to middle "C". For

example, pressing a key one octave below middle "C" would set the

direction field to "12". If the amount field is set to any value other than "0",

the transpose light will go ON, indicating that the transpose function is

active. It will turn OFF when this field is returned to "0", or if <Transpose

permanent> is selected.

• The FROM and TO fields:

These two fields specify the start and end of the region to be permanently

transposed when the <Transpose permanent> soft key is pressed. These are

BAR.BEAT.CLOCK type fields.

• SOFT KEY 1 - <Transpose Permanent>:

Pressing this soft key causes the above specified transposition to be made

permanent by actually changing each of the midi note numbers within the

specified region of the sequence. After this operation, the AMOUNT field

is reset to "0" and the transpose light goes off.

112

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 112 / 228

Результаты поиска

Содержание MPC 60

Отзывы: