Akai MPC 60 Скачать руководство пользователя страница 96

Страница: 96 / 228

NOTE 3: If the copied data is longer than the sequence to be copied into,

the portion of the copied data which extends past the end will not be

copied. If an attempt is made to copy past the end of the destination

sequence, the following warning screen will appear when <Execute> is

pressed:

At this point, you may either press <Proceed> to copy it anyway, or press

MAIN SCREEN to cancel the copy.

NOTE 4: If the destination track is unused, the contents of the CH

fields (in the PLAY/RECORD screen) of the source track will be copied

to the corresponding fields of the destination track.

4.3.7 Copying an entire sequence to another sequence

This function is useful if you want to make a perfect copy of a sequence,

including all parameters, into another sequence number, replacing all data

and parameters previously contained in that sequence number. To use this

function, select option 7 from the EDIT screen, and the following screen

will be displayed:

A description of the on-screen fields follows:

• The COPY CONTENTS OF SEQUENCE field:

This is the sequence to be copied from. The active sequence number is

automatically inserted here when this screen is entered.

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 96 / 228

Результаты поиска

Содержание MPC 60

Отзывы: