Akai MPC 60 Скачать руководство пользователя страница 198

Страница: 198 / 228

198

9.1 Overview

The MIDI key provides access to a number of parameters related to Midi.

In this section you will learn to:

• Remove or "thin out" selected event types from the Midi input data

• Remove velocity data from the incoming Midi input data

• Set the MIDI SOFT THROUGH feature

• Select or defeat the MPC60's special sustain pedal processing

• Assign incoming Midi note numbers to the internal drums

• Assign outgoing drums to Midi note numbers

• Select the Midi channel which the internal drums play from

• Remotely control the Akai ME-35T Audio/Midi Trigger interface And

more.

When the MIDI key is pressed, the following screen appears:

There are four options. The fourth option, ALL NOTES OFF, causes a

midi "All notes off" command to be sent out on all channels, forcing any

notes currently playing to be immediately turned off. Sometimes, because of

slight midi incompatibilities between instruments, a note may erroneously

stay on. Selecting this option should cause any notes which are on to be

turned off.

The functions of the first three selections are described in detail in the

following sections.

Содержание MPC 60




































































































































































































































Результаты поиска

Содержание MPC 60

Отзывы:

Akai MPC 60, Руководство оператора, Страница: 198 / 228

Результаты поиска

Содержание MPC 60

Отзывы: