Zelmer 13Z013, User Manual, Page: 97 / 104

97
GW13-013_v03
Place the fi lter holder in the brew head.
Notice: Projections on the holder must fi t in the slots of
the brew head.
Turn the fi lter holder all the way to the right. Press the PROGRAM button.
Press the single espresso button.
The coffee pouring process will resume. The moment
the desired amount of coffee has been poured, press
button again to stop the pouring process.
Press the double espresso button.
The coffee pouring process will resume. The moment
the desired amount of coffee has been poured into
2 cups, press button again to stop the pouring
process.
Cleaning
Remove the grid from the drip tray. Remove the drip tray, wash it and replace it. Check that the plastic insert is in the right place on the
drip tray.
Take out the water tank. On the base under the water tank there are two pins
– a grey one for cleaning coffee fi lters, and a black one
for cleaning the steam wand.
Use the grey pin to clean the holes of the coffee fi lter.
Wrap the steam wand with a damp cloth and turn on
steam for 10 seconds.
Take out the black pin for cleaning the steam wand
from the base.
Insert the pin for the steam wand into the bottom part
of the wand.