YOKOGAWA FA-M3V e-RT3 Plus, Hardware Manual

Page: 49 / 274

A2-15
IM 34M06C11-01E
(2) F3PU30-0N/F3PU30-0S Power Supply Modules

Specifications
Item
Specifications
F3PU30-0N/F3PU30-0S *1
Supply voltage 100 to 240V AC, single phase, 50/60Hz
Range of supply voltage change 85 to 264V AC, 50/60Hz
±
3Hz
Power consumption 100VA
Inrush current 20A max. (120V AC, Ta=25°C)
,
45A max. (240V AC, Ta=25°C)
Fuse
Time-lag fuse
(Built into the L and N terminals and cannot be replaced.)
Rated output voltage 5V DC
Rated output current 6.0A
Insulation resistance
5M

min. when tested between a group of external AC terminals and the
FG terminal using a 500V DC insulation resistance tester
5MΩ min. when tested between a group of FAIL-signal contact output and
internal circuit using a 500V DC insulation resistance tester.
Withstanding voltage
1500V AC for one minute between a group of external
AC terminals and the FG terminal
1000V AC for one minute between a group of FAIL-signal contact output
and internal circuit.
Leakage current 3.5mA max.
Allowable momentary power
failure time
20ms
External dimensions 58.0 (W) x 100 (H) x 126.1(D)mm
*2
Weight 380g
Compatible base module Dedicated to F3BU05, F3BU09, F3BU13 and F3BU16
*1: The only difference between modules F3PU30-0N and F3PU30-0S lies in the screw diameter of their screw terminal
blocks.
*2: Excluding protrusions (see the dimensional figures for more information)

Components and Their Functions
Figure A2.3 F3PU30-0N/F3PU30-0S Power Supply Modules
WARNING
To avoid electrical shock, turn off the power before wiring.
Note
LG terminal has a half potential of the input power supply voltage when LG terminal isn’t
connected to earth appropriately.