YOKOGAWA FA-M3V e-RT3 Plus, Hardware Manual

Page: 196 / 274

A3-36
IM 34M06C11-01E
A3.9 CE Marking Conformance

About CE Marking
CE Marking aims to integrate the safety regulations existing in countries within the EC
community and ensure free circulation (movement) of products guaranteed to be safe. A
manufacturer or importing agent is legally obligated to display a CE mark on a product
circulated or marketed within the EC community showing conformity to the requirements
of EU directives that are applicable to the product.
* 1
Each EU directive covers a certain range of equipment; the FA-M3 is required to
conform to the EMC directive (2014/30/EU), the Low Voltage directive (2014/35/EU) and
the RoHS directive (2011/65/EU).
Each directive describes only the essential requirements; an equipment manufacturer is
required to test the conformance of equipment to directives applicable to the equipment
before displaying the CE Mark on the equipment.
*1
：
The CE Mark of the FA-M3 is shown on the system name plate on the base module.
For details on modules conforming to the CE Marking, see Appendix A2, “Approved/Compliant modules.”

Standards Structure
Figure A3.36 shows a conceptual diagram of the CE Marking standards structure.
CE Marking
EMC directive
2014/30/EU
Low Voltage directive
2014/35/EU
RoHS directive
2011/65/EU
Machine directive
EU direcitve
EN standards,
international standards
EN 61326-1
EN55011
EN61010-1, EN61010-2-201
EN61000 series
(=IEC61000 series)
CISPR 16
etc.
EN61000 series
etc.
EN61000-6-2
IEC61000 series
Lower
level
Higher
level
FA030901.VSD
EN50581
Figure A3.36 Conceptual Diagram of Standards Structure