YOKOGAWA FA-M3V e-RT3 Plus Hardware Manual Download Page 166

Page: 166 / 274

A3-6

IM 34M06C11-01E



Mounting on the DIN Rail

Mount a base module on the DIN rail as follows.

Note

- Ensure that the base module is securely attached to the DIN rail.
- Do not use the DIN rail to install the FA-M3 system in an environment where it

would be subjected to excessive vibration, impact or mechanical load as it may fall

off the DIN rail.

- Secure both ends of the base module so that it would not slide along the base

module.

Viewed from the side of the FA-M3

(1) Hook this side.

DIN rail

(2) Push in the other side.

(1) Hook this side.

(2) Push in the other side.

(A)

(B)

FA030207.VSD



Removing from the DIN Rail

(1) Pull downward

(2) Pull toward you.

(1) Pull downward

(2) Pull toward you.

Pull hook (A) in the direction of the
arrows before pulling the module
toword you (Hooks can be easily
disengaged with a flat-blade
screwdriver).

FA030208.VSD

Summary of Contents for FA-M3V e-RT3 Plus



















































































































































































































































































Search results

Summary of Contents for FA-M3V e-RT3 Plus

Reviews:

Related manuals for FA-M3V e-RT3 Plus

Brands by name

Popular brands

YOKOGAWA FA-M3V e-RT3 Plus, Hardware Manual

Search results

Summary of Contents for FA-M3V e-RT3 Plus

Reviews:

Related manuals for FA-M3V e-RT3 Plus

Brands by name

Popular brands