YOKOGAWA FA-M3V e-RT3 Plus, Hardware Manual

Page: 233 / 274

Appx. A2-1
IM 34M06C11-01E
Appendix A2 Standard compliant products

General
This table lists the modules for the FA-M3 range-free controller that are approved for the UL standard and comply with
the CE marking, RCM mark and KC mark standards below.
Certification or Compliance standard No.
UL
UL508 approved
(File No.E188707, Overvoltage Category
*2
： II, Pollution Degree
*3
: 2)
CE
EMC Directive
*1
EN 61326-1 Class A, Table2
EN 61326-2-3
*4
EN 55011 Class A, Group 1
EN 61000-6-2
EN 61000-3-2
EN 61000-3-3 Compliance
Low Voltage
Directive
EN61010-1, EN 61010-2-201 compliance
(Overvoltage Category *2 : II, Pollution Degree *3 : 2, Altitude : up to 2,000 m)
EN 61010-2-030 compliance (Measurement Category :O)
*5
RoHS Directive *6
EN 50581 Compliance
RCM
EN 61326-1 Class A, Table2
EN 55011 Class A, Group1 Compliance
KC Korea Electromagnetic Conformity Standard compliance
*1: This product is classified as Class A for use in industrial environments. If used in a residential environment, it may cause electromagnetic
interference (EMI). In such situations, it is the user's responsibility to adopt the necessary measures against EMI.
*2: The term Overvoltage Category involves prescriptions on resistance to surge voltage reduction due to lightning and has four categories.
Overvoltage Category II applies to systems with a rated voltage of 220/230/240 V and applies to electrical appliances, portable devices, etc.
*3: The term Pollution Degree represents the degree of pollution with foreign matter, solid, liquid or gaseous, that may produce a reduction of
dielectric strength or surface resistivity in the operating environment of the equipment. Pollution degree 2 refers to an environment where
normally only non-conductive pollution occurs but occasionally temporary conductivity caused by condensation is to be expected.
*4: EN61326-2-3 is applicable only to F3CU04-
□□
.
*5: EN 61010-2-030 is applicable only to modules with analog input terminal.
Don’t use the analog input terminals of FA-M3 for measurement on Main Circuit, since those terminals have no measurement category.
*6: 10-Substances RoHS. Phthalate ester have high migration (the property of substance transfer from other products upon contact). Therefore,
care must be taken to prevent process contamination with. After unpacking each package, please control the products to prevent contamination
by the customer side.
■ User's Manuals and Approved / Compliant modules
The latest manuals are available to download from URL.
Japanese
https://partner.yokogawa.com/japan/itc/index.htm
English https://partner.yokogawa.com/global/itc/index.htm
■
General matters related to safety and installation
Refer to the following manual.
IM 34M06C11-01E Hardware Manual
IM 34M06C12-81 BEFORE USE
■
Standard compliant products
Symbol "
✓
" in the tables below means “approval” or “compliance”.
Symbol "NA" in the tables below means "not applicable".
The blank in the tables below means “non-approval” or “non-compliance”.
About a module that isn't shown in the tables below or that has option code /C
□□
or /Z
□□
, contact your local
Yokogawa sales personnel.
This information is based on March 31 2020. The latest information is available from YOKOGAWA Pertner Portal site on
“
■
User’s Manuals and Approved / Compliant modules”.