YOKOGAWA FA-M3V e-RT3 Plus, Hardware Manual

Page: 139 / 274

A2-105
IM 34M06C11-01E
(6) Monitor Cables (for F3SP08-2
□
, -3
□
, and -5
□
)
These cables are used to connect to the sequence CPU modules F3SP08-2 □ , -3 □ ,
and -5
□
only. They are connected to the programming port labeled PROGRAMMER of
the CPU module to provide for higher-level link (personal computer link) service.
They cannot be used to provide connection for the FA-M3 programming tool WideField3.
 KM21-2A (D-sub 25-pin)
1
2
5
6
1
2
3
4
5
7
8
SHIELD
SD
RD
SG
SG
FG
SD
RD
RS
CS
SG
CD
SHIELD
To external equipment
D-sub 25-pin male
To CPU module To external equipment
Signal name Pin No. Signal name Pin No.
To CPU
module
Maximum number of insertions/removals:
External equipment end: 500 times
CPU module end: 1000 times
External View Internal Connection
 KM21-2B (D-sub 9-pin)
1
2
5
6
1
2
3
5
7
8
SHIELD
SD
RD
SG
SG
CD
RD
SD
SG
RS
CS
SHIELD
To CPU
module
To external
equipment
D-sub 9-pin female
To CPU module To external equipment
Sign al name Pin No. Signal name Pin No.
Maximum number of insertions/removals:
External equipment end: 500 times
CPU module end: 1000 times
External View Internal Connection
Model Length L1 (m)
Tolerance
+L2 (cm)
Tolerance
–L3 (cm)
Maximum number of
insertions/removals
External
equipment
CPU module
KM21-2A 3 15 0
500 times 1000 times
KM21-2B 3 15 0