91
The method of connecting external devices via SMS is the same as described in points 3 and
4 above, except that the value of
SIRENOUT
can be
OUT2
,
OUT3
, or
OUT4
according to the
desired output number.
7.6 Examples for output control with GSM call (ringing)
1. Output control - Gate opening
To do this, it must be set in advance: In the
Access List
, the telephone number from
which
Easy2s
®
can receive an output control call (GSM) must be added.
OUTMODE
must be a
Gate
,
GATEON
and
GATEOFF
must be set to any SMS text,
GATESMS
SMS must be set to
Enabled
and
SIRENOUT
must be set to
OUT1
.
If you want to define the output reset value (how many seconds later after switching the
output it switches the output back), enter that
OUTHDEL
value for the desired second
value - this is how much time the gate will close after switching!
Then ring (call) the phone number of the SIM card in Easy from your phone:
This sends an
output control
command to open the gate to the device, to which the "
SMS
success!"
you will receive a reply message via SMS and then before
GATEON
entered
text - Eg "
GATE OPEN
”
If you did not enter a control number in the
Access List
, “
SMS aborted! Permission
required!
” You will receive an SMS message back.
2. Output control - Gate opening
To do this, it must be set in advance: In the
Access List
, the telephone number from
which
Easy2s
®
can receive an output control call (GSM) must be added.
