39
By
enabling
the
OBJ_ID
parameter, you can request that the
Easy 2
overwrite the incoming
event’s Contact ID code –
incoming on TIP-RING line from the alarm system - Customer ID by
its own (
ACCOUNT
parameter). If you’ll enable it, then this will be transmitted to the center
by this identifier.
If
you’ve changed
some of the parameter values, the program will highlight the changed value
lines by
bold
. For sending the listed parameter values for the device (regarding the
Selected
coloumn)
–
check the proper selection
–
push the
Write config
button at the bottom of the
screen.
At the end of the parameter sending, the device is restarting by using the new settings.
If you need to add the SIM PIN, then open the
GPRS Service
parameter group
and modify
the
PINCODE
parameter setting.
If it is necessary, you can save the configuration to your computer by the
Save file
button at
the right upper side of the screen.
