34
You can use these buttons next to
ARM
to arm
(
OFF
), disarm (
OFF
) the alarm mode.
Important! In addition to manual control, you can also control these functions remotely,
via SMS messages and calls.
4.9 Output relay control
The outputs of the device can also be controlled manually from the
EasyTerm
software. Output no. 1
(
OUT
marked on the panel) can also be used for door opening - when switching to door opening mode
- if the output (
OUTMODE
) is set to
Gate
. (Note that the outputs of the IO expander cannot be used
for gate opening.)
In this case, you can see the status of the gate opening at the
OUT
title and you can manually control
the relay output by the
ON
/
OFF
buttons,
which also indicates the status of the output line.
In addition to the output / gate opening settings, customers can be added to the
Access list
–
where
you can limit who
can open / close the gate by registering their phone number.
For more information on gate opening (gate opener / barrier output control), see
Gate Opening
part.
Important! In addition to manual control, you can also control these functions remotely,
via SMS messages and calls.
