87
PW=ABCD,GPRSEN=0,SYS1=1,ACCOUNT=1130,LFGSMFREQ=60,DTMFTIME=60,RESET
2.
Signaling and transmitting to an Enigma IP-receiver / SIMS Cloud
®
The alarm system is connected to the TIP-RING input port, the received Contact ID codes are
forwarded through the cellular network by the Enigma protocol and signaling to an Enigma IP
receiver or to the SIMS software.
PW=ABCD,GPRSEN=1,SFUNCT=1,BACKUP=1,SYS1=1,ACCOUNT=1130,LFFREQ=300,LF
PRES=1,APN=NET,SERVER1=89.133.189.139,PORT1=9999,IPPROTO=UDP,IOGPRS=
1,RESET
3.
GPRS transmitting to the dispatcher centre
The alarm system is connected to the TIP-RING input, sabotage monitoring is connected to
the input line, the incoming received signals are converted to Contact ID codes and they are
transmitted through the cellular network for the remote dispatcher centre IP address.
PW=ABCD,GPRSEN=1,SFUNCT=1,BACKUP=1,LFFREQ=300,LFPRES=1,APN=NET,SERVE
R1=89.133.189.139,PORT1=9999,SERVER2=10.197.251.10,PORT2=8010,IPPROT
O=TCP,SWPROTO=2
PW=ABCD,IOGPRS=1,I1EVENT=110,I1PART=01,I1ZONE=001,IDELAY=25,I1LHEN=1
,I1INV=0,I1ARM=0,TEL1=+442031234567,I1S=1,I1V=1,IVSMS=1,I1ON=ERROR,I
1OFF=GOOD,SMSFWD=1
PW=ABCD,ISABEVENT=331,ISABON=SABOTAGE.PM,OUTMODE=0,SIRENOUT=1,SIREND
EL=30,RESET
4.
Standalone alarm system operation mode
–
with SMS notification only
There are sensors connected to the inputs, sending signals via GSM netowork (SMS message)
PW=ABCD,GPRSEN=0,LFGSMFREQ=300,LFUNIT=1,LFPRES=1,IOGPRS=1,IDELAY=25,
I1LHEN=1,I1INV=0,IN2INV=0,I1ARM=0,I2ARM=0,TEL1=+442031234567,I1S=1,I
2S=1,IVSMS=1,SMSFWD=1
