82
The customer will receive a notification SMS message from the succesful processing of the
SMS command that he sent (where the following are reported: number of sent commands,
process success/failure). For answering the sent SMS commands, an acknowledge response
SMS message will be received (e.g.
„
OK
” or the queried v
alues).
General hints:
-
In every parametring SMS command (!) you have to use the password command (
PW
)
at the first position - as
PW=ABCD,……,RESET
-
You have to use the
RESET
command in the last parameter message command, at
last the position!
-
The new configuration values become active only after reboot
-
After sending the last parametring message a couple of minutes later you will receive
a response from the device that how many parameters were processed
7.1 Authentication command
In every SMS message (!) you have to define the password at the first command position! E.g.
„
PW
=…”
Command
Description
PW
Connection / authentication password
PWNEW
Password change, adding the new password for connection
authentication
The default password is
ABCD
, which can be changed (
PWNEW
). It can be max. 16 chars.
7.2 Query commands
You can send several query commands in the same SMS text message, but cannot mixed with
further value-added commands!
You will receive a response SMS text notification with the queried values for answering the
sent SMS command message.
