71
By the
CIDUNCACK
parameter you can
enable
that the
Easy 2
will send immediate and
automatic acknowledge to the alarm center
–
independently that the signaling to the centre
was sent successfully or not.
This could be important for some alar, centers where the handshake for alarm signaling is not
imporant or not available. When the surveillance centre is not able to send a response
acknowledge to an incoming alarm event, this can be helpful to apply.
You can use this feature only for your own risk!
The
STARTUPCID
parameter allows the immediate status sending and signaling when the
device starting up. When it is
enabled
, then in case of a restart or turning off the
Easy2
will
automatically sends the restart status (e.g. CID code: E901
–
Restart (by software), or CID
code: E900
–
Turning on (by hardware)).
By the
REBOOTDAY
parameter you can
enable
the industrial- and safety standard daily once
device restart event.
