58
For the standalone alarm system modem there are some safety settings as the
IxARM
parameter, which is capable of granting that the current input line can transmit signal only in
Armed
status (value is
Armed
), or whether it is useful to transmit every status changes
–
even in
Disarmed
status (value is
24 hours
). The
armed
value is used for window & door
detectors/sensors by classic, the
24 hours
arming is capable of protecting the secured zones
–
as protecting the front door in
night mode.
If you want to be notified about sensor sabotage events (as cable cut, etc.) then configure the
I1EOL
for the input nr. 1 and the
I2EOL
parameter for the input nr. 2 to
Enabled
value.
You can
enable
the
ARMSMS
parameter, which notifies about the remote
arm/disarm
events.
The
ARMON
and
ARMOFF
parameters are for defining the SMS notification messages for the
arming on
and
arming off
events. The
ARMFAIL
equals with the unsuccesful
arming/disarming event SMS notification message.
By the
ARMBLOCK
parameter, you can
enable
that only the arming will be allowed only for
the closed zones (and for the sensors with closed status)
–
which can be reasonable by safety
needs.
