83
In each (!) SMS message, the password command and the password must be entered in the
first place. Eg "
PW
=…"
Command
Response content
INFDEV
or
DEVSTAT
It will response a SMS report with the current status of the
Easy 2
:
account nr. (customer ID), signal strength, software version, hardware
identifier, device IMEI identifier, SIM card ICC identifier, battery status,
IP address. Contains:
ACCOUNT, SQ, SWVER, HWID, IMEI,
SIMICC, VBATT, IP
INFIO
Current status of the input lines and the output line.
Containing parameters:
ACCOUNT, SQ, current status of the
inputs/output
INFTEL
Configured voice/SMS notification settings, phone numbers and
notification (SMS text message) order sequence, voice call (ringing)
order sequence will be responsed.
Containing parameters:
ACCOUNT, SQ, TEL1, TEL2, TEL3, TEL4,
I1S, I2S, I1V, I2V
INFSMS
Input SMS notification settings.
Containing params:
ACCOUNT, SQ, I1ON, I1OFF, I2ON, I2OFF
INFIP
Server connection settings.
Containing parameters:
ACCOUNT, SQ, IMEI, IP, SERVER1,
PORT1, SWPROTO
7.3 Configuration by SMS messages (list of commands)
Here we collected all SMS command parameters which are NOT handled by the
EasyTerm
.
You can use all further listed commands (exact
EasyTerm
parameter names and value).
When parametring you always have to use password authentication (
PW
) in every message
first position, and once the
RESET
command in the last position of the
last SMS message
!
Therefore, you will ask the device
to
perform a reboot after the successful configuration of the
new parameter settings!
