70
Over the recorded phone numbers, now you can manually control the output lines
–
even the gate
opening
–
from this feature at here. You can check the current status of the output(s) at the left side
of the screen and you can control by the buttons, manually.
When the gate opening parameter is enabled
(
Configuration:
Output
settings,
OUTMODE:
Gate
), then at the left side of the
screen you can close the gate by the
OUT
title with the
ON
button, and open by the
OFF
(when the
Easy2
sends the control command to the gate opening system).
When the alarm feature was activated
(
Configuration:
Output
settings,
OUTMODE:
Alarm)
then the armin status can
be checked with the
ARM
ON
/
OFF
status and here you can arm the alarm system by the
ON
button
or disarm by the
OFF
button.
Important! Over the manual control, these features can be remotely controlled via SMS
text messages and initiating a voice call (ringing).
Attention!
You cannot use the outputs of the IO-exopander (OUT2, OUT3, OUT4) for gate
opening. These outputs can be used for remote switching of external devices.
5.6 Advanced safety settings
In the
Other
parameter group you will found further general safety and alarm feature’s
settings which is used in case of the security and safety aimed tasks.
