16
•
periodic short flashing:
75 msec filling in / 3 sec filling out: normal operation,
connected to the GSM network
•
continuously lights
: voice call active (e.g. during GSM signal transmitting)
ALR: Alarm center active -
green
When the device connected to the alarm center it shows the status of the the alarm line (Tip-
Ring). Lights: speaker pulled on, not lights: speaker put down or alarm center not presented.
PWR: Power voltage active -
green
Signs when the
Easy2S
is under power and voltage and operating. When it is not lighting, the
device
is powered off and has no active power source.
1.4 Operation requirements
◼
General conditions
•
Using a 8-24V power supply with adapter (12V DC 1A), or using the 12V/24V output of
the alarm center and connected to the
PWR
input of the device.
•
In case of substituting the phone line: activated SIM card
•
In case of TCP/IP based (cellular network) signal transmitting - via the 2G/3G/4G network
–
data SIM card (with private APN access)
•
There can be differences between the Mobile Operator conditions at APN service charges
and data traffic unit fees (depend on available rates). Ask for more Info at Your MO.
•
Cellular network coverage with enough signal strength.
▪
Configuration requirements
•
USB data cable connected to the micro-USB port (USB 2.0 Micro type.B) of the device and
the USB port (USB 2.0 type.A) of your PC
•
A computer, installed Microsoft Windows
®
7/8/10 operation system and .Net 4.0
framework.
