24
2
–
Status window
3
–
Terminal window (device messages)
4
–
File handling (Funcion selection and Configuration load/save)
5
–
Parameter configuration
4.2 Connecting to the device
a.) Serial data connection
In the
Connection
settings
window (1), at the
Serial Port
tab choose the proper and available
COM port for the
Serial port
field.
You can remotely access the device through cellular network at the
TCP-IP
tab. You also can
Reset
Password
, and monitorize the serial port through the terminal at
Serial Monitoring
tab.
Attention!
The device by factory is configured for transmitting the incoming alarm signals of
the connected alarm system through GSM connection. If you
’d
like to use it as a
TCP/IP transmitter via the mobile network or as a standalone alarm system, then
take consider the value
Address
and
Port number
when configure and connect to
the device.
When the device can be seen on the serial port in the
Connection window
(1), at the
Serial
Port
the application will offer the option to choose from the available COM ports.
The
Password
must be filled (by default the
password is
„ABCD”,
which will be filled
automatically).
If you won’t change it, then just
leave it as it is
–
or fill the value password then
push the
Open
for connecting.
Then the port opening messages will appear at the
Terminal window
(3), then soon the device and
modem, SIM identifiers in the
Status part
(2).
