28
If you no longer need the
EasyTerm
or you want to disconnect, you can close the serial connection in
the
Connection window
(1) with the
Close
button (with the Disconnect button for a TCP / IP
connection).
Password reset:
On the
Reset password
tab, at the
Password
field,
fill or copy the IMEI’s
middle 5 characters
, then
push the
Reset
button.
Then the
Easy 2
password will be restored and
recovered to the
ABCD
default value.
Monitoring the serial port messages:
At the 4th tab, at the
Serial Monitoring
, you can
Open
it, and connect to the device in surveillance
(read only) mode, when only the left side of the window is active with the signal strength data and
terminal window messages.
This feature is provided for monitoring, checking the
Easy 2
current operation without any intervention
or configuration change. Further details on the Chapter
4.4
.
When you are attempted to
Close
the monitoring, after all you should click to the
Serial
Port
tab, for
connecting the device for parameter configuration.
4.4 Terminal window, communication messages
In the
Terminal window
(3) the device and modem communication messages, data and values are
continuously incoming.
Here you can check the modem information messages, the executed AT-commands (
black
) and the
modem answers and
EasyTerm
messages (
blue
) as the failure messages (
red
). There you can track
the exact operation of the
Easy2s.
