Appendix
•
Watkiss DigiVAC Service Manual - Issue 2 - 29/11/04
131
Chapter 9 Appendix
9.1 Specifications
Intended Use This product is intended for the collation of materials as
specified below.
Production
DigiVAC
Up to 3,500 sets per hour, continuous production.
Up to 7,200 sets per hour, continuous production.
Number of Bins
DigiVAC
8 or 12
8 or 12 per tower. 1 or 2 towers.
Bin Capacity Up to 60 mm - although bin capacity is irrelevant due to con-
tinuous loading on the run, making the bin capacity logically
unlimited.
Sheets Sizes 120 x 200 to 350 x 500mm
Stock Range 50 to 300gsm plus
Coated paper minimum 90gsm
Detection Electronic detection for miss, double, jam, empty bin and
stacker full.
Dimensions
Width
Length
Height
Weight
660mm
880mm (1220mm with jogger)
1620mm (8 bins); 1960 (12 bins)
216kg (8 bins); 240kg (8 bins with jogger)
266kg (12 bins; 290kig (12 bins with jogger)
Electrical Adjustable for 190-240V, 50 or 60Hz; single phase, 10 Amp
Noise 75 dB (A)
Operating Conditions 10-35
°C at 35-85% relative humidity
Options •
Modular 8 or 12 bins - 8 bin machine can be upgraded to
12 bins
•
: Multitower configurations
•
Programmable 20
° offset jogging stacker
•
Watkiss BookMaster range of bookletmakers and trim-
mers
•
: Watkiss Automatic Stitch-Fold and Trim
Production and specifications are subject to operating conditions. The specified
paper thickness figures are given for guidance only. The actual performance of the
machine will depend on the nature of the paper and covers used. In line with a policy
of continual improvement, the manufacturer reserves the right to alter the materials
or specifications of this product at any time without notice.
Radio Frequency Emissions
This equipment has been tested and found to comply with the limits for a Class A dig-
ital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
