4
Watkiss DigiVAC Service Manual - Issue 2 - 29/11/04
Overview
•
Modules & Configuration
Figure 1:3
The table below lists the modules available for the DigiVAC Collator, some
of these are modules that may be used independently of the Watkiss DigiVAC
(e.g. BookMaster). The table gives the product abbreviation, the name, the fac-
tory part number and the module software address for each complete module
assembly.
Service information for ancillary equipment is provided in separate service
manuals:
• BookMaster Service Manual - part no. 969-240
• Automatic Stitch Fold & Trim - part no. 969-270
• SpineMaster Service Manual - part no. 969-230
Module Address:
The module address is used by the system software to iden-
tify and control certain modules. The individual feed bins are identified by an
address number from 1 to 12, whilst the other modules use 17 upwards. Not
all modules need a module address.
Tower A
Tower B
!
!
"
#
$
%
&
'
(
)
*
)
+
+
Rear Door (DRDR or DNRD)
"
Booklet Maker (DBMS, DBMP or DASF)
%
Trimmer (DTMS, DTMP or DATR)
'
Outfeed Conveyor (DBOC or DCNV)
!
Tower B Top Module, including bridge
,
(not illustrated) Straight Jogger
#
Base Module (DBAS)
&
First 4 Feeders (DF4F)
)
Add-on 4 Feeders (DA4F)
*
Control Panel (DCTL or DGUI)
(
Top Module (DTOP)
$
X-Jogger (DXJG)
