Waters ACQUITY CM-30S, Overview And Maintenance Manual, Page: 68 / 146

3 Maintaining the 30-cm single-zone column manager
68 October 7, 2014, 715004178 Rev. B
Spare parts
To ensure that your system operates as designed, use only Waters Quality
Parts
®
. Visit www.waters.com/wqp for information about Waters Quality
Parts, including how to order them.
Safety and handling
Bear in mind the following safety considerations when performing
maintenance procedures:
Maintenance schedule:
Procedure Frequency For information...
Replace the leak sensor As needed See page 73
Replace the column-outlet
tubing
As needed See page 76 and
page 84
Replace the passive-preheater
assembly
As needed See page 97 and
page 104
Replace the ferrule on the
column fitting
As needed See page 119
Replace the valve cartridge As needed See page 123
Clean the CM-30S with a soft,
lint-free cloth, or paper
dampened with water
As needed See page 125
Warning:
The components of the CM-30S can be contaminated
with biologically hazardous materials. Always wear
chemical-resistant, powder-free gloves while handling the
components.
Warning:
To prevent injury, always observe Good Laboratory Practice
when handling solvents, changing tubing, or operating the CM-30S.
Know the physical and chemical properties of the solvents used (see the
Material Safety Data Sheets for the solvents in use).