Waters ACQUITY CM-30S, Overview And Maintenance Manual, Page: 94 / 146

3 Maintaining the 30-cm single-zone column manager
94 October 7, 2014, 715004178 Rev. B
b. Tighten the cap nut onto the column fitting.
6. Depending on the position of the column tubing that you are replacing,
do one of these things:
a. If you are replacing the column tubing from position 1, 2, 3, or 4,
insert the tubing into the tubing guides on the left and right-hand
sides of the column compartment, and clip the tubing guides closed.
b. If you are replacing the column tubing from position 5, 6, 7, or 8,
insert the tubing into the tubing guides on the right-hand side of the
Cap nut
Column fitting
Column
Column-outlet tubing
Tubing guide
clipped
Tubing