Waters ACQUITY CM-30S, Overview And Maintenance Manual, Page: 52 / 146

2 Preparing and operating the CM-30S
52 October 7, 2014, 715004178 Rev. B
12. To prevent loose tubing from interfering with the operation of the
column-compartment drawer and outer CM-30S door, route the
column-outlet tubing through a column clip on the column plate.
13. Attach the eCord fob to the appropriate iButton, located inside the front
panel. To avoid dislodging the eCord fob from the receptacle when
closing the column-compartment drawer, ensure the eCord fob is
oriented vertically, as shown below.
Note:
When the CM-30S is configured as part of an APC system,
iButtons are optional.
Column-outlet tubing
Column plate
Column clip
eCord fob
iButton