VEM VEMoDRIVE VSI 2.0 HD, Instruction Manual

Page: 77 / 244

CG Drives & Automation,01-5326-01r3b FFunctional Description 75
11.2 Main Setup [200]
The Main Setup menu contains the most important settings
to get the AC drive operational and set up for the
application. It includes different sub menus concerning the
control of the unit, motor data and protection, utilities and
automatic resetting of faults. This menu will instantaneously
be adapted to build in options and show the required
settings.
11.2.1 Operation [210]
Selections concerning the used motor, AC drive mode,
control signals and serial communication are described in
this submenu and is used to set the AC drive up for the
application.
Language [211]
Select the language used on the LC Display. Once the
language is set, this selection will not be affected by the Load
Default command.
Communication information
Select Motor [212]
This menu is used if you have more than one motor in your
application. Select the motor to define. It is possible to
define up to four different motors, M1 to M4, in the AC
drive. For parameter set handling including Motor sets
M1 - M4 see Chapter 11.2.6 page 90.
Communication information
Default: English
English 0 English selected
Svenska 1 Swedish selected
Nederlands 2 Dutch selected
Deutsch 3 German selected
Français 4 French selected
Español 5 Spanish selected
ǜǿ cc ǶǴǵ 6 Russian selected
Italiano 7 Italian selected
C
esky 8 Czech selected
Turkish 9 Turkish selected
Modbus Instance no/DeviceNet no: 43011
Profibus slot/index 168/170
EtherCAT index (hex) 4bc3
Profinet IO index 19395
Fieldbus format UInt
Modbus format UInt
211 Language
Stp English
Default: M1
M1 0
Motor Data is connected to selected
motor.
Default: M1
M1 0
Motor Data is connected to selected
motor.
M2 1
M3 2
M4 3
Modbus Instance no/DeviceNet no: 43012
Profibus slot/index 168/171
EtherCAT index (hex) 4bc4
Profinet IO index 19396
Fieldbus format UInt
Modbus format UInt
212 Select Motor
Stp M1
212 Select Motor
Stp M1
9(0R'ULYH 96, 9(0 U