VEM VEMoDRIVE VSI 2.0 HD, Instruction Manual

Page: 141 / 244

CG Drives & Automation,01-5326-01r3b FFunctional Description 139
Deviation Band width [3AB]
To define the speed deviation window within which the AC
drive is in control of the motor.
Communication information
Deviation Time [3AC]
To set the time during which the deviation condition must
be active, before the inverter trips.
Communication information
LAFS Load [3AD]
To set the load below which the V
&.P%3*7&
goes
dependent field weakening operation.
Communication information
When set to OFF, the load dependent field weakening
function is switched off.
CRIO N input function [3AG]
Sets the function of CRIO/Crane I/O interface N(Null)
input.
Communication information
Default: 0
Range: 0 – 4 x Sync speed
Modbus Instance no/DeviceNet no: 43191
Profibus slot/index 169/95
EtherCAT index (hex) 4c77
Profinet IO index 19575
Fieldbus format Int, 1=1 rpm
Modbus format Int, 1=1 rpm
Default: 0.10 s
Range: 0.05 – 1 s
Modbus Instance no/DeviceNet no: 43192
Profibus slot/index 169/96
EtherCAT index (hex) 4c78
Profinet IO index 19576
Fieldbus format Long, 1=0.001 s
Modbus format EInt
3AB Dev Bandwidt
Stp rpm
3AC Dev. Time
Stp
s
Default: Off
Off 0 Off
1–100 1–100 1% – 100%
Modbus Instance no/DeviceNet no: 43193
Profibus slot/index 169/97
EtherCAT index (hex) 4c79
Profinet IO index 19577
Fieldbus format Long, 1=1%
Modbus format EInt
Default: Zero Pos
Off 0 N input not used
Zero Pos 1
N input used for joystick zero position
indication.
Brk Ackn 2
N input used for Brake Acknowledge.
see page 114.
Modbus Instance no/DeviceNet no: 43194
Profibus slot/index 169/98
EtherCAT index (hex) 4c7a
Profinet IO index 19578
Fieldbus format UInt
Modbus format UInt
Note: Brake Acknowledge via Crane I/O has priority (and
overrules) Brake acknowledge via control board I/O
([521 DigIn1] - [528 Dig In8]).
3AD LAFS Load
Stp Off
3AG Crane N Func
Stp
Zero Pos
9(0R'ULYH 96, 9(0 U