VEM VEMoDRIVE VSI 2.0 HD, Instruction Manual

Page: 194 / 244

192 CG Drives & Automation, 01-5326-01r3b
Reset Energy [7331]
Resets the energy counter. The stored information will be
erased and a new registration period will start.
Communication information
11.8 View Trip Log [800]
Main menu with parameters for viewing all the logged trip
data. In total the AC drive saves the last 10 trips in the trip
memory. The trip memory refreshes on the FIFO principle
(First In, First Out). Every trip in the memory is logged on
the time of the “Run Time [731]” counter. At every trip, the
actual values of several parameter are stored and available for
troubleshooting.
11.8.1 Trip Message log [810]
Display the cause of the trip and what time that it occurred.
When a trip occurs the status menus are copied to the trip
message log. There are nine trip message logs [810]–[890].
When the tenth trip occurs the oldest trip will disappear.
After reset of occurred trip, the trip message will be removed
and menu [100] will be indicated.
For fieldbus integer value of trip message, see message table
for warnings, [722].
Communication information
Default: No
Selection: No, Yes
Modbus Instance no/DeviceNet no: 6
Profibus slot/index 0/5
EtherCAT index (hex) 2006
Profinet IO index 6
Fieldbus format UInt
Modbus format UInt
NOTE: After reset the setting automatically goes back to
“No”.
7331 Rst Energy
Stp No
Unit: h: m (hours: minutes)
Range: 0h: 0m–65355h: 59m
NOTE: Bits 0–5 used for trip message value. Bits 6–15
for internal use.
Modbus Instance no/DeviceNet no: 31101
Profibus slot/index 121/245
EtherCAT index (hex) 244d
Profinet IO index 1101
Fieldbus format UInt, 1=1
Modbus format UInt
8x0 Trip message
Stp h:mm:ss
810 Ext Trip
Stp 132:12:14
9(0R'ULYH 96, 9(0 U